Progressive Dynamics PD9260 / PD9280 fault codes
The 3 fault codes below are the ones that apply to this Progressive Dynamics power converter family. The other 2 Progressive Dynamics power converter codes in our database belong to different model families — they are listed further down so you do not troubleshoot against the wrong table.
Covered model numbers
PD9260PD9280
Not on the list? Check the rating label before you troubleshoot — the code table below will not apply. Where to find it →
Fault codes on the Progressive Dynamics PD9260 / PD9280
On an Inteli-Power converter fitted with a Charge Wizard or remote pendant, a steadily lit… Charge Wizard — Normal (rapid blink) info
A fast-flashing indicator (roughly one to five flashes per second) means the Inteli-Power … Charge Wizard — Storage (slow blink) info
A brief flash about once every 6-8 seconds means the Inteli-Power converter has entered St…
Codes that do not apply to this model
These 2 codes exist on other Progressive Dynamics power converters. If your unit is showing one of them, it is not from this family — re-check the model number on the label before acting on any of these.
If the Inteli-Power converter repeatedly switches on and off, it is usually its thermal/ov… No DC output (ATC fuses blown)
When an Inteli-Power converter produces no 12 V output, the most common cause is that the …
Where the model number is
On the converter case inside the power-distribution centre, behind the fuse panel cover.
Sources
- Wizard or Pendant Operation — Progressive Dynamics, Inc. (Storage mode - brief flash every ~8 seconds, 13.2 VDC)
- PD9100/9200 Series Power Converter Owner's Manual — Progressive Dynamics, Inc. (110953E - Storage Mode 13.2 VDC, 15 min every 21 hrs at 14.4 V)
All Progressive Dynamics power converter fault codes →
Compare power converter codes across all brands →
Find another model number →