Progressive Dynamics RV power converter fault codes
RV converters/chargers turn shore or generator AC into 12V DC and charge the battery. Most show charge-mode LED indicators rather than numeric codes; "faults" are usually no-output conditions.
How to read the code
Read the charge LED colour/blink pattern and check the DC fuses. No 12V output most often means a blown fuse or a tripped thermal/reverse-polarity protection.
Models covered: every code below applies to the Progressive Dynamics PD9200 series.
All documented codes
Charge Wizard — Boost (solid LED) info
On an Inteli-Power converter fitted with a Charge Wizard or remote pendant, a steadily lit… Charge Wizard — Normal (rapid blink) info
A fast-flashing indicator (roughly one to five flashes per second) means the Inteli-Power … Charge Wizard — Storage (slow blink) info
A brief flash about once every 6-8 seconds means the Inteli-Power converter has entered St… Cycling on/off (thermal shutdown) warning
If the Inteli-Power converter repeatedly switches on and off, it is usually its thermal/ov… No DC output (ATC fuses blown) warning
When an Inteli-Power converter produces no 12 V output, the most common cause is that the …
On an Inteli-Power converter fitted with a Charge Wizard or remote pendant, a steadily lit… Charge Wizard — Normal (rapid blink) info
A fast-flashing indicator (roughly one to five flashes per second) means the Inteli-Power … Charge Wizard — Storage (slow blink) info
A brief flash about once every 6-8 seconds means the Inteli-Power converter has entered St… Cycling on/off (thermal shutdown) warning
If the Inteli-Power converter repeatedly switches on and off, it is usually its thermal/ov… No DC output (ATC fuses blown) warning
When an Inteli-Power converter produces no 12 V output, the most common cause is that the …
Which of these codes apply to your model?
Not every code below exists on every Progressive Dynamics power converter. Pick your model number to see only the table that applies to it — and which codes it will never show.