Everchill RV refrigerator fault codes
RV fridges (absorption or 12V compressor) throw codes when they lose cooling, fail to ignite on gas, or detect a sensor/power fault.
How to read the code
Most RV refrigerator codes appear directly on the temperature display. Note the exact text or number before resetting, since clearing the fault can erase it.
Models covered: every code below applies to the Everchill SRD-360W TG-E, SRD-360WTG-E.
All documented codes
All indicator lights flashing warning
An under- or over-voltage event has occurred. Unlike the individual light 4 and light 5 in… Indicator light 1 flashing warning
Refrigerator sensor fault. The control board is not getting a usable reading from the fres… Indicator light 2 flashing warning
Ambient temperature sensor fault. The board has lost a plausible reading of the air temper… Indicator light 3 flashing warning
Freezer defrost sensor fault. The board cannot read the defrost temperature sensor on the … Indicator light 4 flashing warning
Undervoltage alarm. The supply has dropped below what the unit will run on, and the compre… Indicator light 5 flashing warning
Overvoltage. The supply has gone above the range the electronics accept and the unit has p… Indicator lights 1 and 3 flashing warning
Fan failure. The board is not seeing the evaporator/condenser fan run as expected. A 12 V … Indicator lights 2 and 3 on (not flashing) info
Not a fault. Lights 2 and 3 lit steadily mean the panel's Power Off function is active — s…
An under- or over-voltage event has occurred. Unlike the individual light 4 and light 5 in… Indicator light 1 flashing warning
Refrigerator sensor fault. The control board is not getting a usable reading from the fres… Indicator light 2 flashing warning
Ambient temperature sensor fault. The board has lost a plausible reading of the air temper… Indicator light 3 flashing warning
Freezer defrost sensor fault. The board cannot read the defrost temperature sensor on the … Indicator light 4 flashing warning
Undervoltage alarm. The supply has dropped below what the unit will run on, and the compre… Indicator light 5 flashing warning
Overvoltage. The supply has gone above the range the electronics accept and the unit has p… Indicator lights 1 and 3 flashing warning
Fan failure. The board is not seeing the evaporator/condenser fan run as expected. A 12 V … Indicator lights 2 and 3 on (not flashing) info
Not a fault. Lights 2 and 3 lit steadily mean the panel's Power Off function is active — s…