Victron Energy RV power converter fault codes
RV converters/chargers turn shore or generator AC into 12V DC and charge the battery. Most show charge-mode LED indicators rather than numeric codes; "faults" are usually no-output conditions.
How to read the code
Read the charge LED colour/blink pattern and check the DC fuses. No 12V output most often means a blown fuse or a tripped thermal/reverse-polarity protection.
All documented codes
Error 1 warning
Battery temperature too high. The charger halts charging to protect the battery and will s… Error 21 warning
Current sensor problem. The measured charge current is out of the expected range, suggesti… Error 26 warning
Terminal overheated. The power terminals are running too hot, usually from a poor or under… Error 33 warning
Input voltage too high. The DC input voltage feeding the charger has exceeded its safe lim… Error 67 warning
The charger is set to be controlled by a battery BMS but is no longer receiving any BMS me… Error 119 warning
Settings data lost. The charger cannot read its stored configuration and has stopped charg…
Battery temperature too high. The charger halts charging to protect the battery and will s… Error 21 warning
Current sensor problem. The measured charge current is out of the expected range, suggesti… Error 26 warning
Terminal overheated. The power terminals are running too hot, usually from a poor or under… Error 33 warning
Input voltage too high. The DC input voltage feeding the charger has exceeded its safe lim… Error 67 warning
The charger is set to be controlled by a battery BMS but is no longer receiving any BMS me… Error 119 warning
Settings data lost. The charger cannot read its stored configuration and has stopped charg…