Oven won't light

Furrion Stove / Range: “Oven won't light”

warning RV stove & oven problems

Safety Never repeatedly trigger the ignitor while gas flows without ignition, as propane will accumulate in the oven cavity and can flash. If you smell gas, stop, shut off the tank, and ventilate. Operate gas ovens only with adequate ventilation and a working CO/LP detector, since incomplete combustion produces carbon monoxide.

What it means

On Furrion RV gas ovens (the lower oven of a 2-in-1 range or standalone gas oven), the oven uses a manually-lit pilot or spark-lit burner with a thermocouple-type flame safety device, not a fault-code display. This symptom covers the oven failing to ignite at all when the knob is set to LIGHT/PILOT and the ignitor is operated.

Most likely causes

  1. Low or empty propane, closed tank valve, or air in the gas line after running out most likely
  2. Dirty or sooted pilot/burner assembly blocking gas or flame common
  3. Spark ignitor not firing (cracked electrode, dead ignition battery, or failed module) common
  4. Blown fuse or lost 12V DC supply on electric-start models less common
  5. Insufficient combustion air inside a tightly closed oven cavity less common

Safe checks you can do yourself

How to reset / clear Oven won't light

  1. Turn the oven knob to OFF and wait several minutes to clear any unburned gas.
  2. Set the knob to LIGHT/PILOT, operate the ignitor, and keep the knob pushed in for the specified time (about 5 seconds, longer after a refill) until the flame is steady.
  3. Release slowly; if the flame holds, set the desired temperature.

When to call a technician

Call an RV/LP technician if the oven will not light after confirming gas, cleaning the pilot, and checking the ignitor; if you suspect a leaking valve; or if the gas smell does not clear.

Applies to

FSRE17 · FSRE21 · FG21MA1EA · FS22N20A · Furrion Chef Collection built-in gas oven · Furrion 2-in-1 range oven

FAQ

What does Furrion Stove / Range code "Oven won't light" mean?

On Furrion RV gas ovens (the lower oven of a 2-in-1 range or standalone gas oven), the oven uses a manually-lit pilot or spark-lit burner with a thermocouple-type flame safety device, not a fault-code display. This symptom covers the oven failing to ignite at all when the knob is set to LIGHT/PILOT and the ignitor is operated.

How do I reset Furrion Stove / Range Oven won't light?

Turn the oven knob to OFF and wait several minutes to clear any unburned gas. Set the knob to LIGHT/PILOT, operate the ignitor, and keep the knob pushed in for the specified time (about 5 seconds, longer after a refill) until the flame is steady. Release slowly; if the flame holds, set the desired temperature.

What is the most common cause of Oven won't light on a Furrion Stove / Range?

The most likely cause is low or empty propane, closed tank valve, or air in the gas line after running out.

Related · Furrion stove / range

Note: No numeric/display fault codes exist for Furrion gas ovens; this is symptom-based diagnosis compiled from OEM model references and multiple troubleshooting guides. Exact pilot/spark behavior varies by model (manual pilot vs spark-lit).

Last verified 2026-06-29 · compiled from manufacturer documentation. Codes can vary by model year — always cross-check your unit’s manual.